PRODUCTS
- ◆ Semi-Auto Granule Packing Machines
- ◆ Semi-Auto Powder Packing Machines
- ◆ Big Granules and Small Blocks Packing Machines
- ◆ Blocks Packing Machines
- ◆ Blocks Foods Packing Machine
- ◆ Valve Bags Packing Machines
- ◆ Jumbo bags/Big Bags/Ton Bags Packing machines
- ◆ Flux Scales
- ◆ Container Packing Machine
- ◆ One Operator Packing Machine
- ◆ Automatic packaging line
- ◆ Optional Accessories
- ◆ Automatic palletizing line
For Food-Oil Company & Feed Company usage
For grain/food/fertilizer company usage
CONTACT US
Wuxi Ruili Technology Development Co., Ltd.
Address: No.22, Jinyi Road, Qianqiao Industrial Park, Wuxi City, Jiangsu Province
Phone: +86-510-83733721
Fax: +86-510-83733722
Marketing Department:
Manager Tang +86-13812005190
Technology Department:
Manager Chen +86-13771032889
E-mail: ruili@wuxiruili.com
Website: www.wuxiruili.com
Current location: News >> Company News
Ton bag scales need regular maintenance and maintenance
Release date: 2020-12-30 15:39:51 Visits: 301
When cleaning, make sure that the equipment is powered off and at a standstill. The cleaning is carried out in the order from the surface to the bottom plate, then to the lower mold slide plate, groove, upper mold inner pressure plate and positioning rod, so that the whole machine is clean and hygienic. In the process of daily operation, standard operation is required, and attention should be paid to the inspection work before, during and after use. After turning on the power switch and the indicator light is on, set the thermostat to the correct state such as the predetermined temperature, so as to ensure the stability and reliability of the operation of the packing scale equipment. In addition, it also helps to extend its service life. During the operation, it was discovered that there was a problem that the seal was not tight after the packaging. In view of this situation, we think the main reasons are: 1. The pressure of the cold-pressed rubber wheel is not suitable; 2. The heat sealing speed is too fast; 3. The heat sealing temperature is not good; 4. The quality of the heat sealing film is defective. We can test to increase the heat sealing temperature, and then check the sealing condition of the packing scale.
Previous: Operational matters of cleaning and maintenance of packaging scales
Next: No